Plug'n Power Remote Controller/Timer
(610-2670)                Troubleshooting             Faxback Doc. # 18459

A particular module doesn't respond to the controller

    Be sure the module and controller are set to the same house code
    and that you are addressing the correct unit code.

    Be sure the power switch for the light or appliance is turned on.

    Try plugging the light or appliance into a different AC outlet that you
    know is "live".  If the light/appliance works, move the module to a
    different outlet.

None of the modules respond to the controller

    Be sure the controller is plugged into an AC outlet.

    Be sure the controller is set to the same house code as the modules.

    Try plugging the controller into a different AC outlet with the module
    in the same outlet.  Then, try a different outlet for the module.

If lights and/or appliances turn on and off by themselves, try a 
different house code.

If, after trying all of the above solutions, you still have problems,
go to your local Radio Shack store for assistance.


(/all-01/03/96)