Lighthouse For Windows
(610-2617W)                Installation               Faxback Doc. # 19272

SYSTEM REQUIREMENTS

    PC compatible computer with Windows V3.1 or higher. (4 Meg RAM 
    recommended).

    EGA resolution display (VGA recommended).

    Hard disk with at least 1.3 Megabytes available space.

    One serial port for the Plug'N Power Home Control Interface.

    Printer (if printed reports are desired).

INSTALLATION INSTRUCTIONS

1.  Insert diskette in drive A:

2.  Use the File->Run command from the Windows Program Manager to run 
    a:setup.

3.  Follow the on-screen prompts.

If your floppy drive is some other drive letter, substitute its letter in
the instructions above.


(CS 1/4/96)