Remote Chime
(610-2656)                 Operation                  Faxback Doc. # 19275

INSTALLATION AND OPERATING INSTRUCTIONS

1.  Use a small screwdriver to set red Housecode dial to same letter as you
    set on your Controller, Timer, or Motion Detector.

2.  Set black Unit Code dial to a number between 1 and 16.

When using the Remote Chime with the Dual Floodlight Outdoor Motion 
Detector (Cat. No. 610-2604 CMC), to alert you when someone approaches your
home, set the Unit Code on the Remote Chime to a number which corresponds
to the "Sensor" switch settings on the Motion Detector, i.e. 
START CODE+1, SC+2, SC+3, or SC+4.

3.  Plug the Remote Controlled Chime into a standard 120V AC wall outlet.


(CS 1/18/96)