Plug'n Power Maxi Controller
(610-2672)                 Operation                  Faxback Doc. # 19282

TO TURN ON A LIGHT OR APPLIANCE

Press and release the TOP of one of the 4 number keys corresponding to the
Unit Code set on the Module to be controlled.

TO TURN OFF A LIGHT OR APPLIANCE

Press and release the BOTTOM of one of the 4 number keys corresponding to
the Unit Code set on the Module to be controlled.

The "Selector Switch" selects whether keys 1 thru 4 control Modules set to
1 thru 4 or 5 thru 8.

TO DIM OR BRIGHTEN LIGHTS

Press and release the TOP of the number key for the Lamp Module or Wall
Switch Module you wish to Dim or Brighten (you can't Dim or Brighten
Appliance Modules).  Then press the TOP of the Dim/Bright key to Brighten
or the BOTTOM of the Dim/Bright key to Dim the light.  Hold the key pressed
until the desired brightness level is reached.

TO TURN ALL LIGHTS ON

Press the TOP of the All Lights On/ALL Units Off key to instantly turn on
ALL lights connected to Lamp Modules and Wall Switch Modules (which are set
to the same Housecode as the Mini Controller).  This key does not affect
Appliance Modules.

TO TURN ALL LIGHTS AND APPLIANCES OFF

Press the BOTTOM of the All Lights On/All Units Off key to instantly turn
off ALL Modules (which are set to the same Housecode as the Mini 
Controller), including Appliance Modules.

The Finder Label is a convenient place to indicate the locations of lights
and appliances controlled by your system.  There is one box for each unit
key.


(CS 1/11/96)