Remote Control Wall Switch
(610-2683A)                Addendum                   Faxback Doc. # 19289

This Wall Switch Module responds to "All Lights On" from any Controller set
to its Housecode.  This allows you to turn "on" lights connected to Wall
Switch Modules at the touch of a button if you hear a strange noise at
night, regardless of what Unit code the Wall Switch Module is set to.

The 610-2683 also responds to "All Units Off" from any Controller set to
its Housecode.  This allows you to turn "off" ALL lights connected to Wall
Switch Modules at the touch of a button when you go to bed, regardless of
what Unit Code the Wall Switch Module is set to.

The 610-2683 has a push button for manual control which allows you to
manually turn the light connected to it ON or OFF at the touch of a button.
You can therefore always control the Module remotely whether or not you
have turned it on or off locally.

There is a slide switch located under the local control push button.  This
switch is a U.L. requirement and is used to turn the power off when
changing a light bulb.

The 610-2683 Wall Switch Module has a "minimum" rating of 60W.  If you try
to control a fixture with a light bulb rated at less than 60 watts, the
light bulb may glow dimly when the Wall Switch Module is turned off.


(CS 1/10/96)