Plug'N Power Split Receptacle Module
(610-2685)                 Addendum                   Faxback Doc. # 19297

The Split Receptacle Module can be used for any kind of lamp including
fluorescent lamps but cannot dim lamps.

The Split Receptacle Module does NOT respond to the "All Lights On" code
but does respond to the All Units Off code.

The Split Receptacle Module's "local control" feature lets you, at any
time, turn on the appliance plugged into the Split Receptacle Module's
top outlet simply by turning the appliance's power switch off then on
again.  You must always leave the power switch in the on position to
control the Split Receptacle Module remotely, but this handy local on
feature means you don't have to always go to where the Controller is
located to turn the lamp or appliance on.  This feature does not work
with "instant on" and remote controlled TVs.


(CS 1/18/96)