3-Way Wall Switch Set
(610-2686)                 Addendum                   Faxback Doc. # 19301

This Wall Switch Module is used to control a light which is presently
controlled by two switches.  The set includes a (Cat. No. 610-2686) master
switch and a (Cat. No. 610-2607 CMC) companion switch. Both switches are
used to replace the existing 3-way switches.  The Wall Switch Module is
rated for INCANDESCENT lights only, up to a max. rating of 500 watts.  It
can be turned on and off, and dimmed and brightened remotely from any X-10
Controller or Timer.

The Wall Switch Module responds to "All Lights On" from any Controller set
to its Housecode.  This allows you to turn "on" ALL lights connected to
3-Way Wall Switch Modules at the touch of a button if you hear a strange
noise at night, regardless of what Unit Code the 3-Way Wall Switch Module
is set to.

The Wall Switch Module also responds to "All Units Off" from any Controller
set to its Housecode.  This allows you to turn "off" ALL lights connected
to these Wall Switch Modules at the touch of a button when you go to bed,
regardless of what Unit Code the Wall Switch Module is set to.

The Wall Switch Module and companion switch have a push button for manual
control which allows you to manually turn the light connected to them ON
or OFF at a touch of the button on either switch.  You can therefore always
control the Modules remotely whether or not you have turned it on or off
locally.

The slide switch under the local control push button on the Wall Switch
Module is used to turn the power off when changing a light bulb.

The Wall Switch Module has a "minimum" rating of 60W.  If a light bulb 
rated less than 60 watts is used, the light bulb may glow dimly when the
Module is turned off.


(CS 1/10/96)