Keyless Vehicle Alarm
(490-0759)                  Installation              Faxback Doc. # 32093

MOUNTING THE SPEAKER PHONE

1.  Select a location under the hood for the speaker horn.  The location
    should be away from any source of extreme heat and should let you
    install the horn pointing down.

2.  Place the speaker horn at the location and use a pencil to mark the
    locations of the three mounting holes.

3.  Drill a 1/8 inch hole at the three locations marked in Step 2.

4.  Secure the speaker horn using the three self tapping screws.

MOUNTING THE HOOD AND TRUNK PIN SWITCHES

1.  Determine locations for the hood and trunk switches that allow them to
    be pressed down atleast 1/4 inch when the hood and trunk are closed
    and that provide access to both sides of the switches.

2.  Drill a 9/32 inch hole at each location.

3.  Coat the hole with an anti-corrosion compound or heavy grease to
    prevent rusting.

4.  Screw the switches into the drilled holes, using a wrench as
    necessary.

MOUNTING THE MAIN MODULE

1.  Select a location for the main module that is horizontal, allowing you
    to mount the module label side up, and that is hidden from view.

2.  Secure the module to the desired location using the supplied screws.

CONNECTING THE WIRING

Refer to Faxback Doc. # 32094.


(IR-02/08/96)