Mobile Alert Proximity Intrusion Sensor
(490-0640)                  Wiring                    Faxback Doc. # 32630

CONNECTING THE SENSOR TO YOUR ALARM SYSTEM

1.  Connect the red wire to a constant 12-volt source.

2.  Connect the black wire to a metal part of your vehicle's chassis or
    directly to the battery's negative (-) terminal.

3.  Connect the brown wire to the alarm system's pin switch input.  For
    most Mobile Alert systems, this is the brown wire.  The following list
    shows the correct terminal on other Mobile Alert Systems:

       CATALOG          TERMINAL
       NUMBER           NUMBER

       49-491            "IN"
       49-791              2
       49-795             12
       49-796             12


(IR-05/09/96)