Remote Control Plate  (490-0524)      Features         Faxback Doc. # 7977

  Built-in Tamper Switch for added security
  Two LEDs show System status
  Easy installation and wiring
  Attractive, stainless steel face plate

The Radio Shack Remote Control Plate is designed to add extra theft
protection to ordinary shunt and momentary key lock installations.
The stainless steel face plate makes installations more attractive.

The built-in tamper switch will immediately trigger the alarm if an
attempt is made to remove the face plate while the security system is
on.  The two LEDs may be wired into the security system to show the
status of the Loop and the Security System (Armed/Disarmed).

Note:  Refer to your system's instructions: some systems use only one
       indicator.

(LB/all-12/01/94)