4PDT Plug-In Relay  (275-0214)  Specifications         Faxback Doc. # 14757

Type:.............................................................SRE-402DP
Current Rating..........................................................5 A
Application:........................................UL E139284, CSA LR74323
Outside View:.....................................................UT - 1192
Contact Form:..........................................................4PDT
Contact Material:........................................................Ag
Contact Gap:...................................................0.25 mm Min.
Contact Pressure:.....................10 grs. Min. at teh center of contact
Contact Resistance:.....................100 milli ohm Max by measurement of
                                         voltage drop test method (DC6V 1A)
Contact Capacity:................................................5A 240 VAC
                                                                  5A 28 VDC

Electrical Specification (at 20 degrees C)

Nominal Voltage:....................................................DC 12 V
Nominal Current:......................................................75 mA
Pick-up Voltage:...........................9V (79% Max. of nominal voltage)
Drop-out Voltage:........................1.2V (10% Min. of nominal voltage)
Max. Applicable Voltage:..............................................13.2V
Coil Resistance:...........................................160 Ohm +/- 10% 
Operate Time (including bouncing time):................20 milli second Max.
                                                       at nominal condition
Release Time:..........................................20 milli second Max.
                                                       at nominal condition

Service Life:

Electrical Service Life:...........................1 x 10 ops. at 5A/240VAC
                                                    1 x 10 ops at 5A/28 VDC
Mechanical Service Life:....................1 x 10 ops at no load condition

Dielectric withstanding strength:

Between Contacts:........................1000 VAC (50/60 Hz) for one minute
Between coil and contact:................1500 VAC (50/60 Hz) for one minute

Insulation Resistance:..............................100 Meg. ohm at 500 VDC
Vibration Test:...............................................10g (10-55 Hz
Shock Test:.............................................................10g

Temperature Raise:

Coil Temp. Rise:........................60 degrees C Max at resistance test
                                               method under nominal voltage
Contact Temp Rise:...................50 degrees C Max at Max contact rating

Application Condition:

Temperature Range:................-25 degrees C to 60 degrees C at humidity
                                         of 60%HR Max under nominal voltage
Humidity:.......................85% HR Max from 5 degrees C to 35 degrees C

Specifications are typical; individual units might vary. Specifications
are subject to change without notice.


(IR/all-06/12/95)