SR-65S Electric Motor
(273-0255)                  Specifications            Faxback Doc. # 31770

Type:........................................Heavy duty Series/Carbon brush
Mounting Screws:.....................................................2.5 mm
Diameter:.............................................27.7 mm or 1.091 inch
Shaft Diameter:.......................................2.3 mm or 0.0905 inch
Motor Extension:......................................10.0 mm or 0.394 inch
Length of shaft (case to end):......................................15.7 mm
Shaft to base:......................................................51.0 mm
Weight (approx.):...................................................49.0 gm

At 12 Volts:
Current drain at no load:............................................300 mA
Speed, no load:..................................................15,200 RPM
Speed at maximum efficiency:.....................................11,500 RPM
Current:..............................................................1.3 A
Stall torque:......................................................230 G-cm

At 18 Volts:
No load speed:...................................................22,100 RPM
Current:.............................................................0.38 A
Speed at maximum efficiency:.....................................16,800 RPM
Current:..............................................................1.8 A
Stll torque:.......................................................330 G-cm

Specifications are typical; individual units might vary.  Specifications
are subject to change without notice.


(IR-04/05/96)