STRAIN RELIEF
(278-1636a)                Specifications             Faxback Doc. # 33910

1.  The size of the recommended hole to mount the different strain reliefs.
    (SPT1/SPT2)

      SPT1: ....................................... (A) 9.5 MM X (B) 8.7 MM

      SPT2: ..................................... (A) 12.7 MM X (B) 11.8 MM

2.  The recommended thickness of the metal chassis to mount the strain
    reliefs.  (SPT1/SPT2)

      SPT1: ........................................... (F) 0.5 MM - 1.6 MM

      SPT2: ........................................... (F) 1.9 MM - 2.5 MM

3.  The recommended wire size that can be used with the strain reliefs.
    (SPY1/SPT2)

      SPT1: ....................................... 3.0 MM X 5.6 MM APPROX.

      SPT2: ....................................... 3.8 MM X 7.6 MM APPROX.

4.  The required minimum pull force to remove wire from the strain relief.
    (SPT1/SPT2)

      SPT1: ................................................... 35 lbs/min.

      SPT2: ................................................... 35 lbs/min.


(BR/EB 6/27/96)