Outdoor Connection Box
(270-0258)                 Preparation                Faxback Doc. # 33976

PREPARATION FOR MOUNTING

1.  Slide the cover off the back plate, then thread a drop cable through
    the center hole and attach it to the splitter's in-port.

2.  If you have a two- or four-way splitter, attach the splitter's in-port
    to the bracket marked 2-WAY or 4-WAY.

    If you have a three-way splitter, attach the splitter's in-port to the
    bracket marked 3-WAY.

NOTE:  If you have a four-way splitter with a center-port to center-port
       clearance of less than 1 inch, cut off the left arm of the bracket
       marked 3-WAY before you attach the splitter.


(YO/EB 6/17/96)