Outdoor Connection Box
(270-0258)                 Mounting                   Faxback Doc. # 33977

MOUNTING THE SPLITTER AND BACK PLATE

1.  To mount the splitter to the box's back plate, drive two of the
    supplied screws into the back plate through the screw holes on the
    splitter.

2.  To mount the back plate, drive the other supplied screw into the
    mounting location through the slot at the top of the back plate.

3.  Attach the remaining cables to the splitter's out-ports, then press the
    cables into the slots on the back plate's shelf.

4.  Slide the cover down over the back plate until it snaps in place over
    the locking tab.  To secure the cover, you can attach one of the
    supplied box-locks through the locking tab.


(YO/EB 6/17/96)