Stereo Power Amplifier (277-0105) Parts List Faxback Doc. # 9515 This PROJECT BOARD is designed specifically for use with the STEREO PREAMPLIFIER (Radio Shack Cat. No. 277-0106). For use in applications such as MAGNETIC PHONO CARTRIDGE, MAGNETIC TAPE HEAD, MICROPHONE, TUNER or whenever high power output and reliable performance are required. It operates from a 9 volt to -30 volt supply. the typical output is 2 watts per channel with a -18 volt supply and an 8 ohm load. This package contains a complete printed circuit board ready for parts to be added to construct this project, you'll need the following parts: Radio Shack Symbol Description Quantity Cat. No. C1, C3 0.1uF PC Capacitor 4 272-1069 C7, C9 C2, C8 5uF/16V Electrolytic Capacitor 2 272-1001 C4, C10 100pF Disc Capacitor 2 272-0123 C5, C11 0.01uF PC Capacitor 2 272-1065 C6, C12, 220uF/16V Electrolytic Capacitor 3 272-0956 C13 C14 1000uF/35V Electrolytic Capacitor 1 272-1032 CR1, CR2 3A/50PIV Diode 2 276-1141 F1 1/4 A Slo-Blo Fuse 1 270-1288 IC Dual Audio Amplifier 1 276-0630 R1, R8 100K Linear Taper Potentiometer 2 271-0092 R2 100K Audio Taper Potentiometer 1 271-1722 R3, R10 1K 1/2 W Resistor 2 271-0023 R4, R5 1 Meg 1/2 W Resistor 4 271-0045 R11, R12 R6, R13 100K 1/2 W Resistor 2 271-0045 R7, R14 10 1/2 W Resistor 2 271-0001 R9/S1 100K Audio Taper Potentiometer 1 271-1727 with switch T1 25.2 Vct/3A Transformer 1 273-1512 *Cabinet (Chassis) 1 270-0253 Fuse Holder 1 270-0364 Dual Phone Jack 1 274-0332 Knobs 4 274-0415 4 Screw Terminal Strip 1 274-0665 Power Cord 1 278-1255 Single Conductor Shielded 1 278-1277 Microphone Cable #22 Hookup Wire 278-1307 Plus Hardware Tools and Solder (ALL-01/26/95)