Model 128 Moviecorder
(160-0828)                 Accessories                Faxback Doc. # 18395

ACCESSORIES

SUPPLIED ACCESSORIES

NOTES:  Unpack all accessories before disposing of the packing material.

        Note the positions of the accessories in the carrying case so you
        can return them to their proper locations.

Battery Pack - supplies power and playback during portable operation.

AC Adapter/Charger - charges the battery or, when used with the power cord,
                     supplies power to the camcorder from an AC outlet.

Auxiliary Power Cord - lets you connect the camcorder and the AC
                       adapter/charger to operate the camcorder from
                       AC power.

Infrared Remote Control Unit - lets you operate the camcorder from a
                               distance.

Clock/Calendar and Remote - provide backup power for the clock/calendar
Control Batteries           and the remote control.

Shoulder Strap - provides a convenient way to carry the camcorder.

Soft Case - stores your camcorder and its accessories.

OPTIONAL ACCESSORIES

Car Battery Adapter/Charger - charges the battery or, when used with the
                              power cord, supplies power to the camcorder
                              from your vehicle.  Use it only in vehicles
                              that have 12-volt negative-ground electrical
                              systems.  (CMC No. 16-2304.

Remote Pause Cable -          allows you to operate the camcorder from up
                              to 15 feet away.  (CMC No. 16-2300)

RF Converter Kit -            lets you play back a tape from a camcorder
                              through a TV that does not have separate
                              audio/video input jacks.  The kit includes
                              a 300- to 75-ohm marching transformer
                              to connect a 300-ohm antenna wire to the
                              RF converter, and a 75-ohm antenna cable
                              to connect the output of the RF converter
                              to a TV antenna input.  (CMC No. 16-2323)


(LB 10/31/95)