Model 103 2-Head VHS VCR
(160-0538)                 Viewing TV                 Faxback Doc. # 19541

VIEWING TV USING THE TV'S TUNER

Turn off the VCR, or press TV/VCR on the remote control until VCR does not
appear on the VCR's display.  If you are using a TV/monitor connected to
the VCR's AUDIO/VIDEO OUT jacks, be sure to set it to the TV mode.  The
antenna or cable signals pass through the VCR unaffected, as if the antenna
or cable were connected directly to the TV.  Use the TV as you normally
would.

VIEWING TV USING THE VCR'S TUNER

1.  Turn on the TV and set it to the same channel as the VCR's OUTPUT
    CHANNEL switch (3 or 4).

    If you are using a TV/monitor that is connected to the VCR's
    AUDIO/VIDEO OUT jacks, set it to the video mode.  (See "If Your TV
    Has Audio/Video (A/V) Input Jacks.")

2.  Turn on the VCR, and press TV/VCR until VCR appears on the VCR's
    display.

3.  Press CHANNEL Down Arrow or Up Arrow on the remote control, or use the
    remote control's number buttons to select the desired channel.


(br/all-03/04/96)