Archer Color Supreme 100 Antenna
(150-1825)                 Operation                  Faxback Doc. # 31243

Extend the telescoping antenna elements to full length and set them to a
convenient angle.  Hold the elements at their bases while you adjust the
elements.

For VHF TV Channels 2-13 and FM radio stations, set the VHF/UHF switch to
VHF.  Then, gradually turn the ROTATOR control while trying different
settings of the FINE TUNING control until you get the best picture (or
sound).

For UHF TV Channels 114-83, set the VHF/UHF switch to UHF.  Then, gradually
turn the ROTATOR control and tilt the dish back and for the until you get
the best picture.  The FINE TUNING control does not affect UHF signals.

IMPORTANT

In weak-signal areas you might get slightly better reception by doing
the following:

    For Channels 7-13 and FM radio, shorten the telescoping elements 
    slightly.

    For all VHF channels, adjust the angle of the telescoping
    elements.


(YO/SP/all-03/20/96)