Model 801
(160-0655)                 Setting the Clock          Faxback Doc. # 31375

Set the clock accurately for proper automatic timer recording.  Use the
remote control to set the clock.

1.  Press POWER to turn on the VCR.

2.  Turn on your TV and set it to the same channel as the VCR's CH4/CH3
    switch, or select the TV's video mode if you connected your VCR to
    A/V inputs.

    NOTE:  If you are not using the TV's A/V input, be sure VCR appears on
           the display.  If it does not, press TV/VCR on the remote
           control unit/VCR appears.

3.  Press PROG.  The MENU display appears on the TV screen.

4.  Press 1 to select the CLOCK SET menu.

5.  Enter the correct hour and minutes with the number buttons.  You must
    precede a single-digit entry with 0.  (Press 0 5 4 0 to set 5:40, for
    example.)

    NOTE:  If you enter a wrong number, press CLEAR as many times as
           necessary to backspace to the wrong entry and enter the correct
           digit.

6.  Press 1 to select AM or press 2 to select PM.

7.  Enter today's date with the number buttons.  (To enter June 1, 1993,
    press 0 6 0 1 9 3.)

    If you enter the correct year, the correct day of the week appears on
    the TV screen.

8.  Press PROG twice to store the information and return to the normal
    screen.

NOTES:  When you set the clock, the display shows '?' if you enter an
        invalid date (February 30, for example).

        If you do not enter anything for over 55 seconds, the display
        returns to the normal screen.


(SP/br 3/19/96)