13" Cable-Ready Monitor/TV
(160-0232A)                 Operation                 Faxback Doc. # 31838

RESETTING CHANNELS

1.  Switch on the Monitor/TV by pressing the POWER button on the set or on
    the remote control.

2.  Set the TV mode by pushing the VIDEO button; a two-digit channel
    number will be displayed.

3.  Press the channel selector button (up arrow or down arrow) on the
    Monitor/TV or on the remote control to scan through the channels until
    the desired channel number is displayed .or, enter a two-digit channel
    number on the remote control number pad.

4.  Adjust the VOLUME, PICTURE, TINT, COLOR, BRIGHTNESS, and V-HOLD
    controls for the best picture and sound.  Press MUTE to temporarily
    turn off the internal speaker.  Press MUTE or either of the Volume
    controls to turn the speaker on again.


(IR-02/20/96)